Easy220 – 120 Volt Converter

$350.00

Convert 120 volt power easily to 220 volt with Easy 220

Create 220 volt power from (2) standard 120 volt wall outlets (non-GFI, separate circuits)

Call today for more information: (833) 220-8658

Super easy to use 220 volt power supply system that plugs into two standard wall outlets on different circuits – presto – you have 220 volt power system that provides 4800 watts of power!

This complete package is all you need to operate equipment that requires 220 volt power.  Applications for this power supply include steam cleaners, technical equipment, computer servers, power tools, international appliances, air conditioners, air compressors, and exercise equipment.

Easy 220 Power System:

  • Operating range is 50 to 100 ft depending on guage
  • Power: up to 4800 watts at 240 volts
  • 20 Ampere capacity
  • UL and OSHA Rated
  • Weight:  3.8 pounds.
  • Size: 6.75 inches x 5 inches x 3 inches.
  • Portable, easy to use, and silent
  • For use with wall outlets that are out of phase and not controlled by ground fault interrupters (GFI’s)

Description

Convert 120 Volt Power to 220 Volts

The Easy 220 Power Supply uses the fact that 220/240 volts AC is supplied to most facilities. The 220/240 volts is divided into 110/120 volt circuits for distribution within the building. Using standard 110/120 volt outlets and the Easy 220 system, you can quickly identify and connect to the separated 110/120 volt halves of the original 220/240, restoring the 220/240 volt AC option without adding new electrical circuits or wiring to the building.

120 to 220 Volt Converter Power System

Outlet Tester

  • Easily determine if wall outlets are on separate circuits
  • Digital readout: 7 to 690 volts, AC/DC
  • Continuity check
  • Phase rotation (three phase electrical systems)
  • Lightweight: Less than 7 ounces
  • Water and dust resistant

Converter Power Supply

  • Converts 110 voltage to 220
  • Provides 4800 watts of power
  • 20 amperes

Power Extension Cords

  • 120 volt
  • 20 ampere
  • Add extension cords, up to 100 feet total length.
  • Requires heavy duty, 10-3 AWG extension cords with 3 prong plugs for equipment loads over 13 amperes.

Adapter Cords

  • (2) Adapter cords which plug the converter system into ordinary outlets, 15 or 20 amp

Use this system when both of the 110-120 volt electrical supply outlets are more than six feet from where the 220 converter case is located.

Input Voltage and Amperage

  • 108 to 125 Volts AC, 60 HZ, non-GFI circuits, two circuits, out of phase

Output Voltage

  • Single Phase Input: 216 to 250 Volts AC (2 times input voltage)
  • Three Phase Input:187 to 216 Volts AC (1.732 times input voltage)

Output Amperage

  • 16 amps max continuous; 20 amps peak at 80% on, 20% off (time), 3 hour max cycle
  • Output Power: Typical and calculated from amperes drawn by equipment: 4600 watts at 230 volts, 4800 watts at 240 volts; 22,000 watts peak, typical at 230 volts.

Output Receptacle

  • Straight blade, double outlet, NEMA 6-20L

Power Consumption

  • 8 watts, plus equipment connected

Size & Weight

  • 6.75 inches x 5 inches x 3 inches and 3.8 pounds

Environment

  • 35 to 95 degrees F, 85% relative humidity, max, non-condensing
  • No explosive gases, dust or other materials
  • Dry. Keep from water, oils or other liquids.
  • Avoid excessive dust

Safety

Uses

  • Steam cleaners
  • Dry vapor steam cleaners
  • Waterless carwash
  • Yacht detailing without chemicals
  • Clean breweries, wineries, dispensers
  • Steam clean to reduce Healthcare Acquired Infections
  • Bed bug removal and kill the eggs

Additional information

Weight 25 lbs
Dimensions 18 × 12 × 12 in

Reviews

There are no reviews yet.

Be the first to review “Easy220 – 120 Volt Converter”

Your email address will not be published. Required fields are marked *